There has been a signature failure - Norton Ghost - Lenovo

After restoring my ghost image to the lenovo 9485, I got the error "there has been a signature failure".

I can restore the image without any problem with R-tools.

I find this article on the web and try their instruction and it works.




Re: There has been a signature failureOptions
Mark as New

Bookmark

Subscribe

Subscribe to RSS Feed

Highlight

Print

Email to a Friend

Report Inappropriate Content

12-22-2008 07:31 AM

Partition does not boot after being restored with Norton Ghost - NetVista / ThinkCentre / ThinkPad General


Applicable Countries/Regions
Worldwide
Preloaded Software Information
Symptom
The master boot record on affected systems is comprised of 4 sectors, as opposed to the single sector expected by Norton Ghost. Since the boot is dependent on coding contained in all 4 sectors, the system hangs when it attempts to boot to the incomplete master boot record. A "signature failure" error message may also be displayed.

Affected configurations
This symptom apples to any NetVista, ThinkCentre and ThinkPad system using the WinPE Rescue and Recovery partition; as opposed to the PARTIES partition used on NetVista, ThinkCentre and ThinkPad systems prior to 2004.

Solution
The Ghost documentation provides the solution. Use the -IB switch when invoking Ghost from the command line or within a batch file. This should be done on both the image creation. The command line syntax is, C:\> GHOST -IB
A complete list of Ghost command line switches is displayed by typing GHOST ? and pressing the Enter key at the command prompt. For further information, contact Symantec technical support.

Additional information
If you need to Ghost an entire hard drive, including a hidden partition, use the following method:
Enter BIOS, go to Security, and set the predesktop area to "disabled" to make the hidden partition visible on the system with the source drive.
Run Symantec Ghost with the -IB switch when you create the image (example: C:\> GHOST -IB)
After the image is created, make the predesktop area visible on the target system by disabling it.
Restore the image created in step 2. No special switches are needed for this step (for NetVista only).
Reset the predesktop area to "normal", the system may be booted normally to the operating system or to the predesktop area by pressing the Access IBM key during POST.

Multiple instance of google talk

1. Right-click on the desktop
2. Select New
3. Select Shortcut
4. Paste this into the text box:
"c:\program files\google\google talk\googletalk.exe" /nomutex
5. Click Next. Name it Google Talk Multiple
Click OK until you are done.
6. Sign out from google talk and uncheck remember password
7. Double clic the new icon and enter your username and password for the first account - check remember password if you want
8. Double clic the new icon and enter your username and password for the second account - check remember password if you want
9. Repeat the same process if you have more than 2 accounts.

Convaincing reason to leave users off vlan 1

see ciscopress bcmsn (ccnp) page 544 pdf version.

All hosts on VLAN 1 (PC-1, PC-2, and PC-3) will experience the broadcast storm. All trunk
links between switches will transport the broadcast frames. In addition, all switch supervisor
CPUs will receive and process the broadcasts because each switch has an IP address for
management assigned to VLAN 1. (For this reason, it is recommended to reserve VLAN 1 for
control protocol traffic only. User-generated broadcasts can overload the switch supervisor to
the extent that it no longer can keep track of its control or “overhead” protocols, such as VTP,
CDP, and so forth. Instead, all user traffic should be kept off VLAN 1.)

How to get google labs with a google apps account

Is Google labs missing from your google apps account?

Here are the step to get your google labs :

1- to dashboard in your google apps account
2- clic domain setting
3- check mark Enable pre-release features and save
4- dashboard and clic service setting
5- clic email
6- check mark Enable Gmail Labs for my users
7- save.
It takes couple hours for the google labs to display in your users setting -- so be patient.

Upside-Down Display In Windows XP

To revert to a right-side up display, hold down the CTRL, ALT and UP (arrow) keys.